TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS
TUGGER LIFT STRAPS

TUGGER LIFT STRAPS

Regular price
$26.00
Sale price
$26.00

If you don’t have a Tugger are you even extreme bro?! 

Sewn by hand by Steve G. in Logan, Utah Tuggers have been used at Erzberg, Paris-Dakar, Last Dog Standing, King of the Motos, Last Man Standing, 24 Hours of Glen Helen, the ISDE, Romaniacs, and by racers and trail riders all over the world. 

Most dirt bikes don’t have a place to grab that won’t toast your fingers or get your gloves all muddy. And sometimes you need to grab your bike in a hurry!

No more groping for a place to grab—the Tugger is ready when you need it and stays out of the way when you don’t. You will appreciate the Tugger™ on the trail when you need to maneuver it over a rock, around a tight switchback or get it out of a deep rut,and even just moving your bike around in the garage.  

After using the Tugger™, you’ll never want to ride without one again.

DIRT BIKE MAG REVIEW


IF YOU HAVE ANY QUESTIONS ABOUT WHICH STRAP WILL FIT YOUR BIKE CHECK THE FITMENT CHART!

Style 1 – Extreme Enduro Rear Tugger – TG1EX
Weight: 1.8 oz with typical mounting hardware!
The Style 1 Extreme Enduro rear Tugger has stainless steel buckles on the webbing assembly and should last forever. Custom embroidery is still available! Fits most dirt bikes. Easy to install, lightweight, tough, and convenient. After riding with the Tugger™, you’ll never want to ride without one again. Weight: 1.8 oz with typical mounting hardware! (That’s less than 1/8 of a pound!)
The Style 1 will fit nearly any motorcycle that uses two bolts to attach the seat to the subframe (18″ max length between the bolts). In addition, the Style 1 fits nearly all full-size KTM/Husqvarna/Husaberg models with the single under-fender seat bolt.
Note: ALL 2020+ TE/TX/TC/FE/FX/FC Husqvarna’s use Style 1!

Style 2 – Front Tugger Original – Upgraded! – TG2B
Weight: 1.4 oz with typical mounting hardware! (3.0 with handle)
If words like “Blackwater” and “Erzburg” get your blood pumping, then you will immediately see the importance of having a front Tugger™! The Style 2 Tugger™ mounts to the front forks, providing a handy place to grab when you get in those situations where someone else is pulling on your bike. You hard-core enduro riders will love it! And let’s fact it: we all get into nasty situations occasionally – that’s part of the fun! The fender is too slippery and muddy, and most handlebars don’t have a crossbar to grab. The Style 2 Tugger™ comes in handy in the nastiest of situations or even just loading your machine into the truck. The front Tugger™ is made from the finest materials available. Like the rest of the Tugger™ line, it is built to work well, look good, and last. Now has a upgraded removable handle to make it even more convenient to use! Universal – Fits most full size dirt bikes.

Style 2 – Extreme Enduro Front Tugger – TG2EX
Weight: 2.2 oz with typical mounting hardware!
An upgrade from the standard Style 2 front Tugger, the Extreme Enduro version is thicker where you grab and has a non-slip covering to handle the worst abuse. It retains the simple and effective buckle attachment system that allows installation on any forks without tools. Like the original Style 2, the Style 2 Tugger™ Extreme Enduro mounts to the front forks, providing a handy place to grab when you get in those situations where someone else is pulling on your bike. You hard-core enduro riders will love it! Universal – Fits most full size dirt bikes.

Style 3-4 Rear Tugger – ’19 Husqvarna TC 125/250, TX 300, FC/FX 250/350/450
Weight 1.5oz.
Style 3-4 has multiple high-strength grommets, is easy to install, lightweight yet rugged, you won’t be disappointed with your purchase! Backed by our no-nonsense lifetime warranty.

Style 5 – Rear Tugger – ’17-18 Husqvarna & `19 TE/FE – TGT5
Weight: 1.1 oz with typical mounting hardware!
The Tugger™ Style 5 is a rear Tugger™ that mounts to the subframe of the new Husqvarna models. Easy to install, lightweight yet rugged, you won’t be disappointed with your purchase! Attaches to the subframe as shown in the pics. It installs in minutes, weighs next to nothing, is super strong, and stays out of the way until you need it.

Style 6 – Triple Clamp Snow Tugger – TGT6
Weight: 3 oz with typical mounting hardware!
Built at the request of snow bikers, the Style 6 Triple Clamp Tugger mounts to the top triple clamp and extends vertically above the handlebar to provide a convenient location to grap your snow bike even when buried in the white stuff. Constructed using two layers of Tugger webbing with an internal stiffener to handle the worst abuse. Easy to install, lightweight, tough, and convenient.


IF YOU HAVE ANY QUESTIONS ABOUT WHICH STRAP WILL FIT YOUR BIKE CHECK THE FITMENT CHART!