CLEARANCE - ALL SALES FINAL
Please read entire description and fitment before purchasing.
Deflectors (plastic shields only); does not include aluminum had guards.
Clean up the look on the front of your bike with our plastic hand guards with integrated LED turn signals. Easily mounts to any aluminum hand guards.
SICASS RACING PN# 22-206c
Thes deflectors are specifically designed to mount to the Sicass Racing Hand Guards, which are not included. The holes to mount the deflectors are pre-drilled and tapped.
FITS:
- 2007-25 KTM EXC (SEE NOTES BELOW)
- 2014-16 Husqvarna FE-S Models (SEE NOTES BELOW)
- 2017-19 Husqvarna FE Models (SEE NOTES BELOW)
- 2020-25 Husqvarna FE-S Models (SEE NOTES BELOW)
NOTES:
2007-23 KTM EXC, 2014-16 Husqvarna FE-S, 2017-19 Husqvarna FE, 2020-23 Husqvarna FE-S
- You may also need additional parts for the turn signal system to work properly:
-
*If you plan to use LED turn signals on the front AND rear, then you will need to install the SAR 22-298 AND the SAR 22-300.
- *If running one set of LED and one set of standard bulb turn signals you do not need the SAR 22-298 nor are you required to install the SAR 22-300 smart flasher.
- In this case the turn signals will blink slightly faster. If you wish to correct the flash rate install the SAR 22-300.
-
*If you plan to use LED turn signals on the front AND rear, then you will need to install the SAR 22-298 AND the SAR 22-300.
2024-25 KTM EXC, 2024-25 FE-S, 2024-25 GasGas ES 350/500
- You may also need additional parts for the turn signal system to work properly:
- *Due to the 2024-25 models NOT having a flasher to replace, one set of SAR 22-690 resistors per one set of LED turn signals is required.