DOBECK EJK PIGGY-BACK FUEL INJECTION TUNER | 2012-16 KTM-500 EXC-F, FE
DOBECK EJK PIGGY-BACK FUEL INJECTION TUNER | 2012-16 KTM-500 EXC-F, FE
DOBECK EJK PIGGY-BACK FUEL INJECTION TUNER | 2012-16 KTM-500 EXC-F, FE

DOBECK EJK PIGGY-BACK FUEL INJECTION TUNER | 2012-16 KTM-500 EXC-F, FE

Regular price
$249.00
Sale price
$249.00
Shipping calculated at checkout.

LOW COST
HIGH PERFORMANCE
Less shop time means more ride time. The Electronic Jet Kit (EJK) is the #1 EFI controller on the market for installation time and gains. 

Plug and play does not just refer to connectors to make installation easy, but the EJK comes programmed and ready to go for stage 1 (after-market pipe and air cleaner) modifications. Forget downloading maps. Forget looking up settings. The EJK installs in mere minutes and you are off to a better, more powerful, smoother ride.

The EJK evolved out of the need to address the ever-increasing complexity of factory fuel injection. For the newcomer to the market or professionals wanting an easier method for tuning fuel injection, the EJK is a customizable solution for the shop that wants to take control of their tuning needs.

GEN 3 is the short term used to describe the Generation 3 Electronic Fuel Injection (EFI) controller manufactured by Dobeck Performance. The GEN 3 was released in 2005 under a private label program.

The GEN 3 is a piggy-back EFI controller because it does not replace the stock ECU, but rather monitors the signals to the injectors and makes fuel adjustments based on the mode settings.

The GEN 3 has a push button interface allowing access up to 6 different modes to allow for quick fine tuning by the end user without needing a computer.

The GEN 3.5 EFI controller is an extension to the GEN 3 controller. The GEN 3.5 technology was released in 2009 also in the DP private label program. The GEN 3.5 controller has the ability to add or pull fuel within each available fueling zone.

KEY FEATURES:

  • OEM supplier to the JD tuner, Best Dual Sports tuner, FMF tuner, Polaris tuner, and many others
  • NO COMPUTER NEEDED
  • NO DYNO REQUIRED
  • Plug N' Play Installation - Minutes to Install, Base Settings are Preset
  • Uses Unique Load Based Technology
  • Offers Full Range Tunability
  • Does Not Interfere with Stock ECU Operation
  • Simple Push Button Adjustment Interface
  • Water-Resistant
  • 2-Year Warranty - Does NOT void any OEM vehicle warranty. Read about the Magnuson-Moss Warranty Act.
  • Compact Size - 2.2" H x 3.4" W x 0.5" 

 

INSTALLATION VIDEO

 

*****NOTE***** 

This device is for Closed Course Competition Use only.

Not Intended for Street Use!  May not conform to CARB / EPA laws and regulations and is not legal for use upon a highway. This controller is NOT California ON-ROAD approved for CARB E.O. D-654

Your order of this product is your consent of agreement to these terms.  You agree to hold harmless Taco Moto Co. and Dobeck from any damages you may incur from the use of this product and you consent to the mandate that this device be installed on a closed course competition use only racing vehicle and will not be used on a regulated highway. 

Pair this to a Pro Moto Billet End cap, FMF, Graves, or Yoshimura exhaust for the ultimate power upgrade.