ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL
ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL
ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL
ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL
ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL

ACF-50 ANTI CORROSION FORMULA 13 OZ AEROSOL

Regular price
$15.95
Sale price
$15.95

THE BEST PERFORMING PRODUCT BY A COMPANY YOU'VE NEVER HEARD OF

IN THE TOOLBOX OF EVERY AVIATION / AIRFRAME TECHNICIAN

MORE THAN WORTH THE COST CONSIDERING THE HEADACHES AND HASSLES THIS WILL SAVE YOU

ACF-50 is a MIL grade aerospace / airframe approved anti corrosion inhibitor for use on all metals subject to rust or corrosion and on motorcycles can be safely used on all painted and unpainted metal, plastics, body, chain, throttle cables, electrical connectors, switches sealed and unsealed, battery terminals, chain adjustment bolts and almost everywhere else except for brakes and rotors.

ACF-50 can be used as an anti seize and to unfreeze rusted and frozen bolts and fasteners. A single application may last up to 12 months in the harshest environments.

  • Will also easily free seized nuts, screws and bolts and can be used on all similar and dissimilar metals to prevent seizing in the first place.

ACF-50 meets Mil-C-81309 and MIL-81309 types II and III which means it is 'approved for ferrous and non-ferrous metals, electrical systems and electronic components'.


Holds approvals for applicable use on all equipment on equipment by all branches and divisions of the US Military, as well as - Gulfstream, Bombardier, ATR Regional Transport, Douglas/Boeing Helicopter, Bell/Textron, Robinson, Enstrom, Sikorsky, MD Helicopters, Schweitzer, Hiller, British Aerospace, Concorde Battery, Raytheon, Piper, Cessna, Pilatus, Beech, Van's, Extra, Air Tractor, Lake, Rolls-Royce, Britten-Norman, Learjet, SpaceX, McDonnell Douglas, and Canadair.

ACF-50 is produced following ISO 9000 guidelines.

We use this all over our bikes and is ideal for new bike preparation.

On a Taco Moto Co Bike


Rust Test Video

Underwater Electrical Test

Review



How to Use:
ACF-50 is 95% product, hence virtually no propellant. Keep the can in a warm environment, shake very well before use and remember a little ACF-50 goes a long way, so keep a rag handy to soak up any excess - then use the rag to help spread the product.

ACF-50 has strong capillary action so will creep into all the areas that moisture can, 'actively' pushing out moisture and replacing it with protection. Go cautiously when applying to calipers to ENSURE YOU KEEP IT OFF THE BRAKES. Use ACF-50 anywhere, except the brakes, on your bike including the engine and exhaust (will smoke on first start and burn off down pipes but still slows down corrosion process). Safe on paintwork, most rubbers and brings up black plastic trim a treat.

ACF-50 contains no water and is approved for electrics so spray directly into electrical joints and components where it will prevent corrosion induced failures and high resistance joints. Works well at stopping dirt, mud and salt from sticking. You can tell the product is still 'Active; as water will bead on contact.



GROUND SHIPPING ONLY 

If this item is on an international or air shipment order it will be removed and refunded.