Regular price
Sale price

AiM Taipan ECU Plug & Play Engine Control Unit

NOTE ON 20+ 500/501 - final Taco Moto exclusive maps for those models are still in development and should be ready for shipping mid to late January 2022.

Taipan is the brand-new aftermarket plug & play ECU created by AiM Italy, exclusively designed for off-road bikes. Thanks to its high technology 32-bit core, it represents an important step forward to improve the performance of your bike, without sacrificing reliability and smoothness.

This specific TaipanECU is unprogrammed. It can be configured for any brand or model bike you require. You will need the UC Bridge Tuner to enable this process.

Once the unprogrammed TaipanECU has been configured with a dedicated brand or model it can not be changed. You will be able to modify the maps written into the ECU but the brand or model which has been configured can not be changed.

It provides the ultimate control in feeling, ignition, ignition phase, start maps, launch control, traction control with altitude and engine temperature corrections.

Feature by feature the AiM wins hands down in a faceoff between it and the Vortex ecu.

Fully compatible with the stock map switch on the KTM, Husky, GASGAS, and Honda machines. 






Taipan Key Features & Advanced Strategies

Injection main alpha-n Injection main speed-density
Injection crank correction Pre-injection
Injection BAP Correction Injection EWT Correction
Injection IAT Correction Injector Battery Correction
Injector 2 option Ignition BAP Correction
Ignition EWT Correction Ignition IAT Correction
Ignition Opening Transient Correction Ignition Closing Transient Correction
Launch Control Injection Launch Control Main Table
Ignition Launch Control Main Table Quick Shift Option
5 Level Traction Control Made in Italy

Traction Control Strategy

For each map, the ECU has a dedicated traction control main table.

Launch Control

For each map, the ECU has a dedicated launch control main table.

High Technology 32-bit Core

Engine control requires precision. At 20,000 RPM the TaipanECU guarantees the precision of 1/10 of the degree: this means an accuracy within 0.8 uses for turning the spark ON!

This precision is the key to guarantee :

A very consistent engine rotation.

The possibility to repeat dozens of tests at the bench, always obtaining the same result.

A perfect reactivity at every minimum change of any point of a map, resulting in more power at the wheel.


AiM Taipan ECU Plug & Play Engine Control Unit

  • Two 0-5V analogue inputs sampled @ 1,000 Hz each, could be alternatively used as a switch to ground
  • Second injector driver for high impedance saturated injectors (12Ω)
  • One low side driver (1 A)
  • Two CAN Bus, one for calibration purposes, one for expansions - (AiM handlebar switch, dataloggers, dash etc
  • Three JST JWPF waterproof auxiliary connector
  • Power consumption 150 mA
  • Connectors: n. 1 JST 04T-JWPF-VSLE-S Connector
  • n. 1 JST 08R-JWPF-VSLE-D Connector
  • n. 1 JST 04R-JWPF-VSLE-S Connector
  • n. 1 33 pin male Connector
  • Body: PA6 + 30% glass fiber
  • Dimensions: 89.4 x 75.4 x 29.3mm
  • Waterproof: IP67
  • Weight: 260g



This device is for Closed Course Competition Use only.

Not Intended for Street Use!  Does not conform to CARB / EPA laws and regulations and is not legal for highway use.

Your order of this product is your consent of agreement to these terms.  You agree to hold harmless Taco Moto Co. and AIM Sportline from any damages you may incur from the use of this product and you consent to the mandate that this device be installed on a closed course competition use only racing vehicle and will not be used on a regulated highway.